 ==============================================================

	Linksys LNE100TX(v5) Fast Ethernet Adapter
             NetWare 32-bit ODI Driver Installation

 ==============================================================

               Copyright (C) 1999-2001 LinkSys Group Inc.
                   All rights reserved.


NetWare DOS ODI Server Driver Installation (NetWare 5.0)
=========================================================

Requirements:
-------------
        Linksys LNE100TX(v5) Fast Ethernet Adapter Driver Disk (LNE100TX.LAN)

Installation Procedure:
-----------------------
1. Insert the Driver Disk into drive A and check the contents 
   of subdirectory  NETWARE\SERVER\NW50
   It should contain the following file :

   LNE100.LAN  	Novell NetWare V5.0 Server Driver for
                Linksys LNE100TX(v5) Fast Ethernet adapter
   LNE100.LDI 	Novell NetWare V5.0 Server Driver Installation
                Information File.
   AUTOEXEC.NCF

2. At the NetWare prompt (indicated by the Server name),
   run the NWCONFIG.NLM program by typing:

   server name: LOAD NWCONFIG <Enter>

3. Select "Maintenance/Selective Install" and press <Enter>.

4. Select "LAN Driver Options (Configure/Load/...)"
   and press <Enter>.

5. Press the <Ins> key to specify other drivers to install.

6. Press <F3> and specify the driver path (A:\ or 
   A:\NETWARE\SERVER\NW50) and press <Enter>.

7. The LNE100.LAN driver should appear in your choice list for
   the 'Select a LAN Driver' field. Choose this driver to
   start the driver loading and binding procedure. This
   will allow you to load and bind all 4 frame types supported
   by NetWare.

8. Next time you start up your system, simply follow steps
   2 to 4 to complete the installation.


All trademarks and brand names mentioned belong to their
respective owners.


-- THE END --
